Arctic OPS Tatou Armor
775.00$
Alpine MultiCam®
RECON SF balistic IIIA helmet
Made with the needs of the modern soldier and law enforcement in mind. The robust shell, ergonomic design, adjustable suspension and padding system, as well as accessory-compatibility, a functional and protective tool ready for any mission.
OBL Tested V0 AND V50 (available upon request)
A copy of the certificate will be provided with each shipped helmet
NIJ STD 0106.01 Level IIIA rated Using NIJ (National Institute Of Justice) Guidelines.The RECON SF ballistic helmet is a high performance, multi-layer, light weight combat helmet. Tested and proven to achieve a ranking of Level IIIA by the USA National Institute of Justice (NIJ STD 0106.01 ) by defeating .357 sig full metal jacket flat nose rounds (FMJ FN) and .44 Magnum semi jacketed hollow point (SJHP) rounds at velocities traveling up to 1450 ft/s.
Complete system weight includes helmet shell, accessory rails, impact liner and retention system.
SIZE (M/L) 22” 1/8 to 23” 2.11
SIZE 2 (XL)23 3/8 to 24” 2.15 lbs
NIJ STD 0106.01 Level IIIA
TESTED REPORT OBL BALISTIC LAB
OBL Tested V0 and V50
Description
Arctic Ops Helmet Alpine MultiCam® The MultiCam Alpine™ pattern was developed to effectively reduce the visual and near-IR signature of a person operating in snow-covered environments. It is intended to be used in every area of operation that receives significant snowfall. The MultiCam Alpine™ pattern can be paired with MultiCam® gear as needed to appropriately match the overall level of snow cover present.
New model 2024
Made with the needs of the modern arctic soldier in mind ????????. The robust shell, ergonomic design, adjustable suspension and padding system, as well as accessory-compatibility, a functional and protective tool ready for any mission.
Complete system weight includes helmet PE shell, accessory rails, impact liner and retention system.
SIZE (M/L) 22” 1/8 to 23” 1.05KG (Shell) 1.53KG(Equipped)
SIZE 2 (XL)23 3/8 to 24” 1.07KG (Shell) 1.55KG(Equipped)
OBL Tested V0 and V50 (available upon request)
NIJ STD 0106.01 Level IIIA rated Using NIJ (National Institute Of Justice) Guidelines.The RECON SF ballistic helmet is a high performance, multi-layer, light weight combat helmet. Tested and proven to stop both 9mm and .44 mag calibers.
Fast Helmet by Tatou Armor Made by UHMWPE
SHROUD:
- Lightest night vision shroud available.
- Comprised of a molded outer housing and a machined removable insert, designed to be changed out without removing the shroud from the helmet, to provide multiple mounting solutions within the same shroud platform. (Alternate shroud solutions often require the shroud to be removed from the helmet to change out the insert).
- Integrated NVG bungee eliminates interference with accessories.
- The low-profile bungee helps prevent snag hazards while stabilizing NVGs.
SIDE RAILS:
Made of high-impact polymer for lights, LED. Mini bungee cords to stabilize devices. Can easily replace suspension, padding, buckles, and chin strap with equivalent model products, helping to customize the helmet to your mission set-up
VELCRO KIT FOR PATCHES:
IR tabs, counter-weight pouch, and battery/NVG wire routing. Offered in Black, MULTICAM, RANGER Green or COYOTE, Velcro kit comes included with every helmet; strips use high adhesive for added strength.
- Speed lock suspension System equipped with steel cable coated with a protective coating, can be adjusted and released with one hand.
- Advanced high-cut ballistic shell made from high-end molded
- Optimized performance with ergonomic fitting and double-layered internal padding (V2HCP®) for comfort
- Ear geometry allows for maximum compatibility with communication devices while reducing the weight of the helmet
- Super-lightweight polymer side rails for easy installation of comms, tactical cams, side-lighting, sentry visors, or added protection.
- The bungee retention system on the shroud reduces interference and snag hazards
- Diamond pads dual-layer autonomous foam padding with Velcro® attachments for adjustments to individual comfort and easy maintenance
- High-capacity Velcro® panels for ID patches and light accessories
- NIJ STD 0106.01 Level IIIA: 9mm
OBL Tested V0 and V50 (available upon request)
NIJ STD 0106.01 Level IIIA rated Using NIJ (National Institute Of Justice) Guidelines.The RECON SF ballistic helmet is a high performance, multi-layer, light weight combat helmet. Tested and proven to stop both 9mm and .44 mag calibers.
WARRANTY
- Guaranteed a service life of 5 years from date of issue
Designed and assembled in North America
Helmet Details
Made with the needs of the modern soldier and law enforcement in mind. The robust shell, ergonomic design, adjustable suspension and padding system, as well as accessory-compatibility, a functional and protective tool ready for any mission.
Made of UHMW-PE for lightweight protection
Resistant to water, UV, corrosion, and gouges
Interior pad system for outstanding comfort and maximum noise reduction
Complete system weight includes helmet shell, accessory rails, impact liner and retention system.
SIZE (M/L) 22” 1/8 to 23” 2.11 lbs
SIZE 2 (XL)23 3/8 to 24” 2.15 lbs
Key features
DETAILS
Made of high-impact polymer for lights, LED. Mini bungee cords to stabilize devices. Can easily replace suspension, padding, buckles, and chin strap with equivalent model products, helping to customize the helmet to your mission set-up
The Lux Liner provides one-piece full coverage impact layer with modular pads, designed for shockwave attenuation.
Suspension System
SPEEDLOCK SYSTEM equipped with steel cable coated with a protective coating, can be adjusted and released with one hand.
The adjustment straps and chin cup have been designed for a close, comfortable fit to the wearer’s face. The asymmetric design keeps the buckle tucked smoothly along the jaw line while maintaining a snug, even feel around the chin cup. The chin cup lining ensures maximum comfort.